Questions shooters ask
Straight answers. Where we don't do something yet, it says so.
Showing 76 of 76 questions
What it is
What is Reload Foundry?
A system of record for shooters who load their own: your rifles and barrels, your load development, the load specs that come out of it, the DOPE cards that run from those specs, your component lots, your range sessions and your firearms usage record — in one place, all tied together. It runs in the browser on your phone, tablet or desktop, installs like an app, and works without signal on the hill.
Who is it for?
Anyone developing and shooting their own loads: ELR and long-range, PRS, F-Class and benchrest, stalkers and pest controllers, club shooters, service rifle — and people loading their first rounds. The method is the same at every level; the app keeps the record straight.
Does it tell me what charge to load?
No, and it never will. Reload Foundry publishes no load data and the coaches will not give a charge weight. You start from your powder and bullet maker's published data, as you should. The app structures the testing, records what happened, and keeps the result traceable to the lots you used.
Is it a ballistic calculator or a reloading app?
Both, joined at the hip. The load on your bench is the load on the DOPE card — same bullet, same lot, same measured velocity, same barrel. Nothing is retyped from one app into another, which is where most DOPE goes wrong.
I'm new to reloading. Is this for me?
Yes. The app walks a workup stage by stage — Charge Weight Testing, Seating Depth, Neck Tension/Primer, Tuner if you have one, then Confirm — and says what each one is for. The Safety page and the Guide are there before you load a round. The one thing it will not do is pick your charge for you; that comes from published data and your own testing.
Is it a British app?
Yes. Built in England by a reloader, for the way we shoot here: metres or yards, MRAD or MOA, inches or millimetres, fps or m/s — your choice, per account. The firearms-record features are written for Great Britain (England & Wales and Scotland); Northern Ireland and Europe are on the list.
The DOPE card and the solver
What kind of solver is it?
A G7 point-mass solver with the terms that matter past 1,000 m: spin drift, earth rotation (with the bearing you capture from the phone's compass), aerodynamic jump from the crosswind, and a temperature-dependent speed of sound. Transonic and subsonic rows are marked on the card, never hidden. Every card prints its solver version, so you know exactly what did the maths.
G1 or G7?
G7 wherever the maker publishes one or you've trued one, because it tracks a modern boat-tail properly. If only a G1 figure exists, the card says so, treats it as an estimate, and tells you to true it. We don't quietly convert and pretend.
Will it agree with the solver I use now?
At zero wind, with the same inputs, you should see agreement to within a couple of hundredths of a mil out to 1,000 m and a bit beyond. With wind on, the card includes aerodynamic jump, which some solvers leave out, so expect a small elevation difference — that's the jump, not an error. Past that, the only solver that's right is the one you've trued to your rifle.
How far will the card go?
As far as you ask, to 3,500 m, in your own step (25 m or more). You also get an exact-distance solve for any range, with decimals: if the rangefinder says 983.2 yd, you enter 983.2 yd. Nothing is rounded to the nearest station.
What happens through the transonic?
The card marks where the bullet goes transonic and where it goes subsonic, and keeps showing the rows past them. A point-mass solver is honest to the transonic and increasingly a guess beyond it — true of every solver, whatever it claims — so we flag it and leave the decision with you. That boundary is your rifle's truly predictable range; past it, trued data beats any prediction.
What conditions does it use?
Altitude, temperature and pressure, with one wind speed and direction, entered by you; the latitude that earth rotation needs is captured from the phone on the card. Standard sea level is the default, so a card never runs on stale conditions without you knowing. Weather-meter integration is in development — the meter will feed conditions on your command; the solving stays with the app.
Why does every card show a solver version?
Because the maths changes. When we improve the solver, the version on your card changes with it, the app updates itself and says so, and you know whether the truing you did still stands. A card you printed in March says what produced it. That's the standard we hold ourselves to.
Can I set my scope's click value, sight height and zero?
Sight height, zero range and turret click value live on the rifle — set once, used by every load. With a click value set, come-ups and wind holds are offered in your turret's clicks, rounded to the nearest click, with the click count under the figure. A zero offset — your known high or low, left or right at zero — can be entered per load, and the come-ups adjust. A rifle zeroed at 100 yd never shows a minus come-up at 100 yd.
MOA or MRAD?
Either, and both calculated off the exact distance rather than a rounded one, so the MOA card is as honest as the MRAD card. Metres or yards likewise.
Can I save a card for a range I shoot regularly, and print one for the stock?
Yes. The Targets tab holds a card per range — each target at its exact distance, your calculated dope or the drops you know — with several saved cards per range if the firing points differ. Altitude and latitude come from the phone's GPS when you set the card up, or you type them if it can't get a fix. It prints as a wrist or stock card, holds and clicks, sized for the usual holders. Load specs and the firearms usage record print as PDFs too.
Does it know my barrel's twist direction?
Spin drift and aerodynamic jump need it. Barrels default to right-hand twist; set left-hand on the barrel if yours is.
Can I get a DOPE card before I've finished load development?
Not from a workup that's still in progress. A DOPE card runs from a load spec with a velocity and a BC — and if you already have a load you trust, Add an existing load on the rifle hub enters it as a load spec with its chrono'd velocity and you get a card straight away, no workup needed. What you can't do is pull a card from a draft halfway through seating-depth testing: nobody shoots past 100 to test seating depth, and a card built on a half-finished load is a confident wrong number.
Truing and chronographs
How does truing work?
Shoot over a chronograph or a ShotMarker e-target at a known distance — laser-measured, ideally — and drop the file on the card. The app takes the velocity the bullet still had at that distance, or at several distances, and trues the bullet's BC to it. The predicted and trued tables then sit side by side, the card marks what was trued and when, and truing distances take decimals — nothing is rounded to the nearest metre. You can also true velocity from the come-ups you actually dialled at known distances.
I keep re-truing and the number keeps moving. Why?
Usually because velocity or conditions moved, not the BC. Rule those out first: chrono the load again, check the temperature and pressure you entered, check the zero. A BC that needs re-truing every outing is telling you something about the load, the chrono setup or the inputs, and the app would rather say so than paper over it.
Which chronographs can I import from?
LabRadar, Garmin Xero (FIT files and ShotView CSV), Athlon Rangecraft Velocity Pro exports and ShotMarker e-target exports, several files at a time. Anything else: paste the velocities or type the muzzle velocity. Live capture straight from the chrono over Bluetooth is in development.
Does the app ever change my chrono's numbers?
Never. Shots and the device's own summary — mean, SD, ES — are stored exactly as the chrono reported them. The app does not re-average, reject or "reconcile" a file against its own arithmetic. You trust your chrono; so do we.
I don't have a chronograph. Can I still use it?
Yes, with the honesty showing. Type the muzzle velocity from the box or the manual and the card carries an amber banner saying it's built on a claimed velocity, not a measured one. Chrono the lot later and the banner goes. A chronograph is the single best thing you can buy for your DOPE, and the app will keep telling you so.
Can I use a downrange radar reading from 800 m?
That's exactly what truing wants. The further out the measured velocity, the better the BC fit — a reading at 800 m tells you far more about the bullet than one at the muzzle.
Do you support custom drag curves from radar data?
Not today. The card runs on one trued G7 (or G1) figure per load — that's what truing fits, and the card tells you which figure it's using.
My bullet maker publishes different BCs for different velocity bands. Which do you use?
The maker's published figure as it stands in the catalogue, with the source noted; the card solves on one G7 figure per load. A trued figure beats the catalogue every time, and the card tells you which one it's using.
Load development
How does load development work in the app?
Charge Weight Testing, then Seating Depth, then Neck Tension/Primer, Tuner if you've selected one, then Confirm. Each stage has its own ladder, its own targets and its own result. Reload Foundry picks the candidate load by group size on paper. Velocity spread (SD/ES) qualifies how much to trust that group — it never picks the load. A flat spot in velocity is shown as supporting information only.
What is the Candidate Node Finder?
After a charge ladder it marks the best-supported charge — the smallest group that its velocity data backs up — and shows the SD, the group and any pressure signs beside it. It's a candidate. You confirm it with a group, or override it. The app never promotes a charge on its own.
How many shots do you want per charge?
Your call: 3 or 5 per block on the printed ladder sheet. Five tells you more than three, and confirmation wants 10-shot strings. The app records what you shot; it won't dress a 3-shot group up as a 5.
Do you print the targets?
Yes. Group targets with corner markers so Measure Target can read them, and ladder sheets that put three charges on one A4 sheet (two if you prefer), each block labelled with its charge, with an aim square and a capture box above it — dial up a touch and the group lands clear of the aim point. Printed for 100 m or 100 yd with the rifle and load on the sheet. Shoot the sheet, photograph it, and each block's group is measured and filed to its own charge row. Sheets for the seating-depth and later stages are in development.
How does Measure Target work? Does my photo go anywhere?
You photograph the target; the holes are found and the group measured on your phone. The photo never leaves the device — nothing is uploaded, nothing is metered — and it's free on every plan. The corner markers give it the scale.
Does it record pressure signs?
Per charge, yes, and the candidate-node banner shows them beside the group and SD, so a hot charge with a nice group doesn't get picked by accident.
How does it handle seating depth — jump or base-to-ogive?
Base-to-ogive at touch, then jumps from there in thou (or millimetres), under the COAL ceiling you set. Inches or millimetres throughout, your choice.
Neck tension, bushings, primers, tuners?
Neck tension in thou, bushing size in inches or millimetres on the load spec, primer by make and type, and a Tuner stage with its own ladder if your rifle wears one.
What's a load spec?
The finished recipe — promoted from a workup, or entered directly if you already have one: components and their lots, charge, seating, neck tension, primer, the measured velocity and SD, the BC in use and the barrel it's for. It prints as a PDF, and it's what your DOPE card runs from.
I already have a load I trust. Can I bring it in without redoing the workup?
Yes — Add an existing load on the rifle hub. Enter it with its chrono'd velocity and it gets a DOPE card like any other. Enter the bullet's measured length on the spec too, so the aerodynamic-jump term has what it needs.
What happens when my powder lot changes?
Lots are the whole point. Every component in a load spec is a lot, not just a name. New lot: re-test what you need to, re-chrono, re-true if it moved — and the old spec and its history stay intact. The DOPE card knows which lot it was earned on.
Does it track brass?
Brass lots, with water capacity and case weight recorded as an average and SD for the lot, and the bushing used. It is lot-level, not per-case — we'd rather do lots properly than fake per-case precision.
Rimfire and factory ammunition?
Yes to both. Rimfire gets its own rifles, lot tracking (scan the box), DOPE cards and exact-distance solves. Factory centrefire is in the catalogue: pick the load, log the lot, chrono it, and it gets the same honesty as a handload — a card on a measured velocity, an amber card on the box figure, or no card until there's a velocity at all.
Bullet data, the catalogue and makers
Where do your bullet BCs come from?
From the makers' own published figures, each row carrying its source and what kind of figure it is — published, converted, measured or trued. Figures quoted at Army Standard Metro are corrected to ICAO at solve time, and the provenance says so. We don't claim to be the most accurate BC source on earth. We claim to tell you where every number came from, and to let your rifle have the last word.
Do you copy data from other apps' libraries?
No. Catalogue figures come from the makers, and your own trued figures come from your rifle; a bullet length you measure stays on your own lot and your own card. Nothing is lifted from another solver's library.
Which makers and cartridges are in the catalogue?
More than 1,900 bullets from Lapua, Berger, Sierra, Nosler, Hornady, Barnes and Virtus Precision, plus the ELR solid makers; 380-plus cartridges from .17 to .50 BMG, including the CheyTac family and .416 Barrett; 270-plus powders with burn-rate ranks; nearly 600 brass lines; and more than 1,300 factory loads. Not there? Enter it by hand with the maker's figure — and tell us, so we add it.
Why do you ask for the bullet's length?
Aerodynamic jump needs it, and stability will. Most makers don't publish length, so the catalogue carries the maker's figure where one exists; where it doesn't, measure your own — five bullets from the box, enter the median on the lot — and your card uses your figure. Never estimated, never copied from anywhere.
Does it check bullet stability and twist rate?
The catalogue carries minimum twist where the maker publishes it, and the barrel records its own twist. The app doesn't yet run a stability check against the two; when it does, it'll say so here.
I've found a catalogue figure that's wrong.
Tell us at hello@reloadfoundry.com with the maker's source. We check it against the maker's published data and fix it in the next catalogue update, source noted. Best-effort sourcing, checked against the official figures, corrected when you catch one — that's the loop.
I make bullets. Can I supply data?
Please do. A per-bullet pack — BCs with how they were measured, minimum twist, length, part numbers and, for hunting bullets, minimum expansion velocity — earns a manufacturer-verified tier in the catalogue and your mark on the card wherever that tier drives a result. Virtus Precision's expansion floors are the first. hello@reloadfoundry.com.
What's the Virtus Precision partnership?
Virtus make lathe-turned copper bullets in the UK and have supplied verified minimum expansion velocities for their hunting lines. On a Virtus hunting load, the DOPE card marks where retained velocity drops below that floor and carries the Virtus roundel to say the figure is theirs, not ours.
Do you have a database of other people's loads?
No. Your loads are yours; we don't publish or pool charge weights. If that ever changes it will be opt-in and aggregated, and you'll be asked first.
Ethical Range, hunting and your certificate
What is Ethical Range?
A boundary on the DOPE card where the bullet's retained velocity drops below its minimum expansion velocity — the maker's verified figure where one exists, or a floor you enter yourself, with an impact-energy floor if you want one. Match bullets never get a number. The shooter remains responsible for accuracy, conditions, quarry, bullet performance and the shot; the app marks a boundary, it does not approve a shot.
What's the deer symbol?
It appears only when your jurisdiction is set and the load meets that jurisdiction's statutory minimums for deer — bullet weight, muzzle velocity and energy, which differ between England & Wales and Scotland. Otherwise you get a plain quarry marker. The figures are shown so you can check them; none of it is legal advice.
Point blank zero?
There's a calculator for it, a "Suggest a point blank zero" button where you set the rifle's zero, and hunting load specs and cards carry the point-and-shoot range for your vital-zone size. Retained energy shows per row.
I stalk with factory ammunition and don't own a chrono.
Log the box velocity and you get a card with an amber banner saying so. Chrono it — a club session on someone else's unit is enough — and the banner goes.
What does it do for my firearm certificate?
Keeps a firearms usage record — rounds fired per rifle and barrel, dated, GPS-located when you record it — and prints it as a PDF. Your certificate details live in Settings and cover every rifle under them; you can photograph the certificate with your phone's document-scan mode to add rifles. Written for England & Wales and Scotland.
Who can see my certificate and rifle details?
You. Records are tied to your account; no other account can read them, and we don't sell or share them.
Do I have to enter serial numbers?
Only where the firearms-record features need them. Adding a rifle for load development doesn't.
Rifles, barrels, inventory and the range log
Switch-barrel rifles? Several barrels?
Yes. Every barrel has its own round count, its own load specs and its own history. Load specs and DOPE cards are stamped with the barrel they were earned on, and a card opened on a retired barrel says so before you dial it.
Will it tell me when my barrel's done?
It won't diagnose a barrel; nothing honest can from the outside. It records velocity and group trends against round count so you can see a barrel ageing — the velocity sag, the groups opening, the throat notes you add — and decide with evidence rather than a feeling.
Cleaning log?
A cleaning log per rifle and barrel — what you did, what you used, patches and dwell if you care to — with rounds since the last clean on the rifle hub and cleaning marks on the accuracy trend, so you can hold your own cleaning interval against your own groups. It shows you the pattern; it never tells you when to clean.
Component inventory?
Powders, primers, bullets and brass by lot, with what each load spec consumed. Scan a factory or rimfire box, or import a CSV.
Range sessions?
Log a session — strings, round counts, conditions, location if you want it — and it feeds the barrel's history and the trends on the rifle hub, newest load first.
Does it work without signal on the hill?
Yes. Install it to your home screen, open the cards you'll need once with signal, and they're there without it — tested in airplane mode and on the hill at Eskdalemuir. A card you've never opened can't appear from nowhere, and the app says so rather than guessing.
The AI coaches and scanner
What does the AI do?
Two coaches and a scanner. App Coach answers "how do I…" about the app; Load Coach reads your own workup and talks through the evidence. The scanner reads ammunition boxes and your firearm certificate so you don't type them. Measure Target isn't AI and isn't metered.
Will the coach give me a charge weight?
No. Ask it and it'll tell you where to look instead. That rule is tested on every release.
How much AI do I get?
A monthly allowance of coach questions and scans by plan, shown in Settings and refilled on the 1st. The plans say how many.
Is my data used to train AI?
No. Coach questions and scans go to a commercial AI provider under business terms that don't use customer data for training. The provider sees the question you typed or the image you scanned, nothing else from your account.
Account, plans, devices and privacy
What does it cost?
Free to start, no card needed; then a monthly or annual plan. The prices are on the plans section — we don't repeat them here so they're never out of date. Measure Target is free on every plan.
How do I get started?
Create an account, add a rifle, and either start a workup or add a load you already trust. The Guide covers the rest.
Can I cancel?
Any time, from Settings → Manage subscription. You keep access to the end of the period you've paid for.
iPhone, Android, desktop?
All three, from the browser. On iPhone: Share → Add to Home Screen. On Android: Install. App-store versions — a cut-down field app with the DOPE card, Measure Target and session logging — are in development.
Why did the app make me update?
Because we shipped something. The app updates itself whenever there's a new version — fixes, new features, catalogue additions — usually without you noticing. The one time it insists is when the maths behind a card has changed: then it tells you, so you're never dialling, or saving a true, against an old solver.
Can I get my data out?
Load specs, DOPE cards, target cards and the firearms usage record export as PDFs. For a full copy of your account data, email hello@reloadfoundry.com and we'll send it.
Can I delete my account?
Yes — Settings → Danger zone. It removes everything: rifles, barrels, specs, cards, sessions, inventory. It can't be undone, and any subscription is cancelled with it.
What do you track?
Cookieless, anonymous analytics — pages, not people. No ad trackers. The privacy policy says it in full.
How is my account protected?
Passwords must be at least 12 characters, every record is tied to your account and readable by no other, and traffic is encrypted. There's no two-factor sign-in today.
Who we are
Who's behind Reload Foundry?
60 Innovations Ltd, a British company, and a reloader with fifteen years at the bench and on the firing line who got tired of spreadsheets. No faces and no names, on purpose: the product is the identity.
I've got a question that isn't here.
hello@reloadfoundry.com. If it's a good question, it'll end up on this page.